Ingios Automated Plate Load Test (APLT) setup to measure k-value for compacted aggregate base. Presenter: David J. White, Ph.D., P.E. President and Chief Engineer, Ingios Geotechnics, Inc Validated Intelligent Compaction
Calibration of COMP-Score RT target values for CCR compaction using in situ tests. Gabriel Nelson, P.E.. President ; Allison Rosenberg, Ph.D. · Vice President, Legislative Affairs & Executive Director of the Board ; Brendan FitzPatrick, M.S., Automated Plate Load Testing (APLT): Stress-dependent resilient modulus of granular subbase over subgrade.
Accelerated testing of pavement foundaiton layers using IMAS. COMP-Score RT Modulus Verification Mapping, US30 Tama County APLT was used to verify achievement of Iowa DOT pavement design modulus of subgrade reaction (k-value) of 150 pci in Des
Construction required multiple layers of fill stabilized with geogrid. 2024 Unpaved e-Compaction Roller Mapping Ingios Geotechnics, Inc. (Ingios) specializes in the development of innovative infrastructure technologies, to modernize and improve geoconstruction practices.
Ingios® Geotechnics Adds Strategic Talent to Advance Infrastructure Gabe Nelson - President at Ingios Geotechnics, Inc. | LinkedIn 18-inch diameter cyclic plate load test using Automated Plate Load Test (APLT)
Our Team | Ingios Geotechnics MnDOT researching geosynthetics stabilization of pavement foundation materials with Iowa State University. Ingios COMP-Score RT Mapping: FHWA AID Demo_Jasper County, Iowa
COMP-Score RT roller calibration for coal combustion residuals (CCR) compaction Ingios Geotechnics: Innovative Geoconstruction Technologies
Founded in 2015, Ingios® Geotechnics, Inc. is a geotechnical engineering and technology firm specializing in geomaterials testing and Ingios is at the forefront of modernizing engineering and geo-construction practices. The company
Compaction machine (roller) collecting data on Iowa unpaved roads. COMP-Score RT Mapping I-25 Colorado
Pavement remaining service life? APLT static and cyclic tests on composite pavement. COMP-Score RT modulus mapping and APLT calibration testing were completed to verify subgrade modulus. Providing expert, field engineering services empowering customers to build better efficiently & confidently in real-time.
Engineered Pavement Foundations and Field Verification of Design Investigation of distressed pavement: Poor foundation support and drainage. David J. White, Ph.D., P.E. - Founder & CEO @ Ingios Geotechnics
Pavement foundation modulus is mapped using e-Compaction roller to verify pavement design input for modulus. Capabilities | Ingios Geotechnics
Mapping of modulus in soft area that was overexcavated and stabilized. Ingios Geotechnics Appoints Veteran Engineer Gabriel Nelson as
US30, Iowa DOT STIC Program - APLT Pavement Foundation Design Verification We provide expert geomaterial, pavement, stabilization, and compaction knowledge to our clients. Our work is primarily in North America, but we also offer Ingios Geotechnics, Inc. | LinkedIn
This project required direct testing using APLT of the pavement foundation layer down hole to understand why pavement failed Entrepreneur, founder, CEO, and professional engineer with deep expertise in civil engineering and geoconstruction. Brings extensive experience leading About Us | Ingios Geotechnics
Subbase modulus degrades during accelerated loading while accumulating permanent defomration. President at Ingios Geotechnics, Inc. · Experience: Ingios Geotechnics, Inc. · Education: The University of Iowa - College of Engineering · Location:
We are a technical team of civil, geotechnical, pavement, materials, and construction engineers, data scientists, software developers, hardware integrators. Ingios Geotechnics, Inc. P.O. Box 101. Northfield, MN 55057 www.ingios.com. SPONSOR. Federal Highway Administration. Part of Cooperative
Industrial work area mapped with COMP-Score RT and verified with APLT. Roller operator improved low resilient modulus areas to improve uniformity of pavement foundation using COMP-Score RT
Pavement Foundation Modulus Overview COMP-Score RT mapping city street in Mankato, MN
Testing on 13th Street in Ames, Iowa to assess load-deformation response subject to static and cyclic loadings. In situ resilient modulus visualized: 3,000 psi vs. 25,000 psi
Research Pays Off October 2017: Validated Intelligent Compaction